[1]         IC Knowledge, Website: www.icknowledge.com, 2002.            

[2]          Bell laboratories, Website: www.bell-labs.com

[3]         IEEE-virtual-museum, Website: www.ieee-virtual-museum.org                          

[4]         Intel Corporation, Website: www.intel.com                                                      

[5]         R. Feynman., There’s plenty of room at the bottom, Journal of Microelectromechanical Systems, 1 (1):60–66, 1992.                                     

[6]         R. Feynman. Infinitesimal machinery, Journal of Microelectromechanical Systems, 2 (1):4–14, 1993.                                                                          

[7]         The international technology roadmap for semiconductors, ITRS reports, 2005.           

[8]         J. Chae, S.S. Park, T. Freiheit, Investigation of micro-cutting operations,  International Journal of Machine Tools and Manufacture, 46 (3-4):313-332, 2006.

[9]         L. Alting, F. Kimura, H.N. Hansen, G. Bissacco, Micro Engineering, Annals of CIRP 52 (2):635-658, 2003.                   

[10]         M.J. Madou, Fundamentals of Microfabrication, CRC Press, ISBN 0-8493-0826-7, 2001.

[11]         K.F. Ehmann, D. Bourell, M.L. Culpepper, T.J. Hodgson, T.R. Kurfess, M.J. Madou, K. Rajurkar, R.E. DeVor, International assessment of research and development in micromanufacturing, World Technology Evaluation Center (WTEC), 2005.

[12]         Mechanical Engineering Laboratory (MEL), Website: www.aist.go.jp,
Japan.

[13]         Programa  de Microtecnologias. Investigacion Estrategica. Plan de Ciencia, Tecnología e Innovación  (PCTI) 2001-2004 del Gobierno Vasco.

[14]         Reports on Micro and Nano Technologies, MINATECH European Project, VDI/VDE-IT GmbH, Germany, 2001.

[15]         EURIMUS II, Eureka Industrial Initiative for Microsystems Uses, Blue Book, Grenoble, 2003.

[16]         NEXUS, Website: www.nexus-mems.com

[17]         M.P. Groover, Fundamentals of Modern Manufacturing 2/e, John Wiley & Sons, Inc, 2002.

[18]         SUSS Micro Tec AG, Website: www.suss.com

[19]         World of Microsystems, 2nd Edition CD-Room, Yole Development, 2000-2003.

[20]         Physikalisch-Technische Bundesanstalt (PTB), Website: www.ptb.de, Germany.

[21]         Microsensors Inc., Website: www.microsensors.com

[22]         B. Choudhary, S. Singh, The bright future of mobile computing. Smartphone & Pocket PC magazine, 2005.

[23]         B. Mukhopadhyay, A micromachined continuous ink jet print head for high resolution printing, Microsensor and Actuator Technology (MAT), TU Berlin, 2005.

[24]         SINTEF, Website: www.sintef.no, Norway.

[25]         Virtual Devices, Inc, Website: www.virtualdevices.net, USA.

[26]         S. Hollar, J.K. Perng, K.S.J. Pister, Wireless static hand gesture recognition with accelerometers - The acceleration sensing glove, Berkeley's Sensor and Actuator Center, University of California, 2000.

[27]         LAUNCH-MICRO European Project, Website: http://193.146.78.41:8080/lmpro

[28]         D. Erickson, D. Li, Integrated microfluidic devices, Anal of Helvetica Chimica Acta 507:11-26, 2004.

[29]         Dentaurum, Website: www.dentaurum.de, Germany.

[30]         STEAG MicroParts, Website: www.microparts.de, Germany.

[31]         B. Braun Corporate, Website: www.bbraun.com, USA.

[32]         Tekes, Website: www.tekes.fi, Finland.

[33]         P. Althainz, J. Goschnick, S. Ehrmann, H. J. Ache, Multisensor microsystem for contaminants in air, Karlsruhe Micronose, Sensors and Actuators B, 33:72-76, 1996.

[34]         D. Culler, D. Estrin, M. Srivastava, Overview of sensor networks, IEEE Computer Society 37 (8):41–49, 2004.

[35]         STEAG microParts, Website: www.steag-microparts.de

[36]         FingerTIP Infineon, Website: www.infineon.com

[37]         S.T. Smith, Meso systems considerations, M4 Workshop on Micro/Meso Mechanical Manufacturing. Centre for Precision Metrology, Northwestern University, USA, 2000. 

[38]         E. Brinksmeier, O. Riemer, R.Stern, Machining of precision parts and microstructures, Proc. 10th International Conference on Precision Engineering (ICPE), Japan, 2001.

[39]         T. Masuzawa, State of the art of micromachining, Annals of CIRP 49:473–88, 2000.

[40]         C. Liu, Foundations of MEMS, ISBN 0-13-147286-0, Publisher: Prentice Hall, University of Illinois at Urbana-Chapaign, 2006.

[41]         R. Lawes, M4 technology Microsystems Event, Council for the Central Laboratory of the Research Councils (CCLRC), 2003.

[42]         M. Esashi, K. Minami, T. Ono, Silicon bulk micromachining and nanomachining, Condensed Matter News 6:31-44, Tohoku University, Japan, 1998.

[43]         C.G. Keller, R.T. Howe, Hexsil tweezers for teleoperated micro-assembly, IEEE Micro Electro Mechanical Systems Workshop, p. 72-77, 1997.

[44]         M. Gower, N. Rizvi, Applications of laser ablation to microengineering, Proc. of SPIE, High-power laser ablation III 4065:452-460, 2000.

[45]         H.K. Tönshoff, A. Ostendorf, S. Nolte, G. Kamlage, T. Wagner, F. Korte, T. Bauer, New applications of femtosecond lasers in micromachining, Proceedings of the 1st Euspen Topical Conference on Fabrication and Metrology in Nanotechnology, p. 10-17, Denmark, 2000.

[46]         J. Meijer, K. Du, D. Hoffmann, V.S. Kovalenko, A. Ostendorf, R. Poprawe, W. Schulz, Laser machining by short and ultrashort pulses, state of the art and new opportunities in the age of the photons, Annals of the CIRP 51(2):531-550, 2002.

[47]         Z.Y. Yu, T. Masuzawa, M. Fujino, Micro-EDM for three-dimensional cavities – development of uniform wear method, Annals of the CIRP 47(1):169-172, 1998.

[48]         Z.Y. Yu, K.P. Rajurkar, H. Shen, High aspect ratio and complex shaped blind micro holes by micro EDM, Annals of the CIRP 51(1):359-362, 2002.

[49]         Y. Li, M. Guo, Z. Zhou, M. Hu Micro electro discharge machine with an inchworm type of micro feed mechanism Precision Engineering, 26: 7-14, 2002.

[50]         C.J. Evans, J.B. Bryan, , “Structured”, “Textured” or “Engineered” Surfaces, Annals of the CIRP, 48 (2):541-556, 1999.

[51]         Fibics incorporated, Website: www.fibics.com

[52]         D.P. Adams, M.J. Vasile, G. Benavides, A.N. Campbell, Micromilling of metal alloys with focused ion beam-fabricated tools, Precision Engineering 25:107-113, 2001.

[53]         D.P. Adams, M.J. Vasile M.J., Krishnan A.S.M., 2000, Microgrooving and microthreading tools for fabricating curvilinear features, Precision Engineering 24:347- 356.

[54]         F. Morrissey, Micro and nano structuring using focused ion beam and dualbeam technolgies, Proc. of the 3rd Euspen International Conference, Netherlands, p. 475-478, 2002.

[55]         S.D. Senturia, Microsystem design, ISBN 0-306-47601-0, Kluwer Academic Publishers, USA, 2001.

[56]         E. Brinksmeier, O. Riemer, Metal Cutting of Microstructures.  International Conference on Multi-Material Micro Manufacture (4M), Germany, 2005.

[57]         Institut für Produktionstechnik (WBK), University of Karlsruhe, Website: www.wbk-ka.de

[58]         Manufacturing Engineering Centre (MEC), Cardiff University, Website: www.mec.cf.ac.uk

[59]         Acceleron, Inc, Website: www.acceleron-enbeam.com

[60]         Norsam Technologies, Inc., Website: www.norsam.com

[61]         TWI Ltd., Website: www.twi.co.uk

[62]         H.S. Lim, M. Rahman, Design and development of a fast tool servo for micro lathe, National University of Singapore.

[63]         J. Fleischer, Manufacturing of Micro Moulds by Conventional and Energy Assisted Processes, International Conference on Multi-Material Micro Manufacture (4M), Germany, 2005.

[64]         E. Brinksmeier, O. Riemer, A. Gessenharter, L. Autschbach, Polishing of Structured Molds, Annals of the CIRP 53(1):247, 2004.

[65]         K. Egashira, T. Masuzawa, M. Fujino, X. Sun, Application of USM to Micromachining by On-the-machine Tool Fabrication, International Journal of Electrical Machining 2:31-36, 1997.

[66]         K. Egashira, T.Masuzawa. Microultrasonic Machining by the Application of Workpiece Vibration, Annals of the CIRP 48(1): 131-134, 1999.

[67]         A. Teshigahara, M. Watanabe, N. Kawahara, Y. Ohtsuka, T. Hattori, Performance of a 7-mm microfabricated car, Journal of Microelectromechanical Systems 4:76-80, 1995.

[68]         Cranfield University, Website: www.cranfield.ac.uk.

[69]         K. Egashira, K. Mizutani, Ultrasonic Vibration Drilling of Microholes in Glass, Annals of the CIRP 51(1):339-342, 2002.

[70]         Bullen Ultrasonics, Inc., Website: www.bullen-ultrasonics.com

[71]         M. Geiger, M. Kleiner, R. Eckstein, N. Tiesler, U. Engel, Microforming, Annals of the CIRP 50(2):445-462, 2001.

[72]         D. Hardt, B. Ganesan, W. Qi, M. Dirckx, A. Rzepniewski, Process Control in Micro-Embossing: A Review, Innovation in Manufacturing Systems and Technology (IMST) Collection, Massachusetts Institute of Technology, 2004.

[73]         Miniature Tool and Die Inc., Website: www.miniaturetool.com

[74]         Centre Suisse d'Electronique et de Microtechnique SA  (CSEM), Website: www.csem.ch

[75]         Sigma Time Compression Technologies (TCT), Website: www.sigmatct.com

[76]         WAFIOS Aktiengesellschaft, Website: www.wafios.de

[77]         Lehrstuhl für Fertigungstechnologie (LFT), Erlangen, Germany, Website: www.lft.uni-erlangen.de

[78]         Micro-systems technology, National Physical Laboratory, UK. 2002

[79]         Livermore National Laboratory’s Microtechnology Center, Website: www.llnl.gov

[80]         D. Erickson, D. Li, Integrated microfluidic devices, Analytica Chimica Acta 507:11-26, 2004.

[81]         Carl Zeiss Inc., Website: www.zeiss.com

[82]         Microtecnologías y Microsistemas. Tendencias tecnológicas a medio y largo plazo. OPTI Fundation, 2003.

[83]         Vision 2020, Nanoelectronics at the centre of change. European Commission. Report of the High Level Group, 2004.

Anterior /  Fin