Document Actions
REFERENCES
1 I. Puertas Arbizu y C. J. Luis Pérez. UPNA. “El menos convencional de los mecanizados”.http://www.interempresas.net/MetalMecanica/Articulos/Articulo.asp?A=12068
2 J B. Giraudi, C. Altini, Universidad de Buenos Aires. Facultad Ingeniería. “Apuntes de clase: electroerosion” http://www.fi.uba.ar/materias/6727/electroerosion.pdf
3 Lazarenko B R, 1943, “About the Inversion of Metal Erosion and
Methods to Fight Ravage of Electric Contacts”. Moscow, WEI-Institut. (Russian)
4 Jablonowski, J., What's New in EDMs?, Modern Plastics International, Marzo 1999.
5 Wire EDM goes Horizontal. Modern Machine Shop, November, 2004
6 Werner, A. R.; Olson, P. C., EDM - A Metal Remoal Process, Society of Manufacturing Engineers, 1968.
7 Houman, L., What's New in Edm Power Supplies and Machines, Society of Manufacturing Engineers, 1973.
8 Poco Graphite, Inc., EDM Technical Manual, Poco Graphite Inc., 1993.
9 Rajurkar, K.P; Pandit, S.M., Formation and Ejection of EDM Debris, Journal of Engineering for Industry, Febrero 1986.
10 Schumacher, B.M.,About the Role of Debris in the Gap during Electrical Discharge Machining, Annals of the CIRP, 1990.
11 http://www.bedra.com/produkte/bedra_edm/microerosion/microcut/microcut/ index_ger.html
12 M. Wilke, Makino GmbH, “Shaping the Invisible” Micro EDM Applications.
13 FANUC Robotics Web page: http://www.fanuc.co.jp
14 Albert M. “Fine Wire is just Fine”, Moder Machine Shop On-line – Gardner Publications Inc. – http://www.msonline.com/articles/099904.html.
15 Albert M. “Wire EDM in the Extreme”, Modern Machine Shop On-line – Gardner Publications Inc. – http://www.msonline.com/articles/029706.html.
16 Christmann H., “Mikroschneiderosion in der Anwendung”, Fachtagung Funkenerosion – Zukunftstechnologie im Werkzeug – und Formenbau, 1999, ADITEC GmbH
17 Katz Z., Tibbles C.J. “Analysis of Micro-scale EDM process”, International Journal of Advanced Manufacturing Technologies, 25 (2005) - 923-928.
18 Masuzawa T., “Micro EDM”. Proceedings of the ISEM XIII (2001). 3-19. Fundación Tekniker. ISBN 932064-0-7.
19 Masuzawa T., “State of the Art Micromachining”. Anals of CIRP Vol 49/02/2000. 473-488
20 B. M. Schumacher, “After 60 years of EDM the discharge process remains still disputed,” J. Mater. Process. Tech., vol. 149, p. 376, 2004
